The SB-5645CAK is a professional 4x4 HDMI™ over HDBaseT™ Matrix Routing Switcher. Supporting (4)HDMI™ inputs and (4) Auxiliary Audio inputs. Output supported (4)HDMI™ outputs, (4)S/PDIF Audio and and (4) HDBaseT™ Transmitter with POH outputs(SB-5645CAP only). High definition digital signals can be selected and distributed to any (4)inputs to (8)outputs simultaneously(channel outputs mirrored). It is based on HDBaseT™ Standard and transmit HDMI™, Bidirectional IR and RS-232 and Ethernet signal up to 100M over a single CATx cable. The switcher is supported HDMI™ 1.4a 3D formats and HDCP 1.3 compliant, data rate up to 6.75Gbps with signal bandwidth 340MHz. Supports wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV HDMI™ resolution up to 4K2K 30Hz. The EDID management can be selected between seven(7) different modes. Control is provided via Front panel push buttons, IR remote, RS-232 pr TCP/IP(not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control(Windows only).

The SB-5645CT is high-performance 4x4 matrix routing switcher for HDMI™ input, HDMI™ and CAT5e/6 output signals simultaneously. Switcher supports Bandwidth 225MHz, HDMI™ 1.4a 3D formats, data rates up to 2.25 Gbps, UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any 4 outputs simultaneously. The Switcher is certified and fully HDMI™ and HDCP 1.3 compliant, with CE, FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, HDMI™ monitors, HDMI™ projectors or audio receivers. Support CAT5e/CAT6 and HDMI™ outputs simultaneously. CAT5e/6 connection on each output extends the HDMI™ signal to remote room via CAT5e/6 HDMI™ Receiver SB-6335R. The EDID can be selected between eight (8) different modes via source row. Control is provided via the front panel push buttons, IR remote, IR Ext. or via RS-232. A RS-232 interface is provided for matrix routing.

The SB-5642LCM is high-performance 4x2 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 2.25 Gbps, enabling 1080p HDMI™ formats and UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any outputs simultaneously. The Switcher is certified and fully HDMI™ and HDCP compliant, with CE,FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors, projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via front panel push buttons, IR remote or via RS-232. A RS-232 Windows GUI interface is provided for matrix routing.

The SB-5648LCM is high-performance 4x8 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 2.25 Gbps, enabling 1080p HDMI™ formats and UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any 8 outputs simultaneously. The Switcher is certified as being fully HDMI™ and HDCP compliant, with CE, FCC, REACH certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors,projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via Front panel push buttons, IR remote or via RS-232. An RS-232 Windows GUI interface is provided for matrix routing. RS-232 or TCP/ IP (not a web browser).

The SB-5682K is high-performance 8x2 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 6.75 Gbps, enabling 4K2K-60Hz HDMI™ formats and UXGA/WUXGA/DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any 4 outputs simultaneously. The Switcher is certified as being fully HDMI™ V2.0 and HDCP 2.2 compliant, with CE,FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors, projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via Front panel push buttons, IR remote or via RS-232. An RS-232 Windows GUI interface is provided for matrix routing.

The SB-5684LCM is high-performance 8x4 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 2.25 Gbps, enabling 1080p HDMI™ formats and UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any outputs simultaneously. The Switcher is certified and fully HDMI™ and HDCP compliant, with CE,FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors, projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via front panel push buttons, IR remote RS-232 or TCP/IP (not a web browser) A RS-232 Windows GUI interface is provided for matrix routing.

The SB-5684K is professional 8x4 matrix routing switch. Supporting eight (8) HDMI™ Inputs. Output supported (8) HDMI™ port. The SB-5688K is based on the HDMI™ standard 4K2K and supports full resolution HDMI™ Video with embedded EDID, With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed to any (8) Inputs to (8) outputs. The Switcher is certified as being fully CEC and HDCP 1.3 compliant, full HD 4K2K HDMI™ V1.4a 3D formats, data rates up to 6.75 Gbps. Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD displays. The EDID management can be selected between seven (7) different modes. Control is provided via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

The SB-5685LCM is high-performance 8x5 matrix routing switcher for HDMI™ signals.This switcher supports data rates up to 2.25 Gbps, enabling 1080p HDMI™ formats and UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any 8 outputs simultaneously. The Switcher is certified as being fully HDMI™ and HDCP compliant, with CE,FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors, projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via Front panel push buttons, IR remote RS-232 or TCP/IP (not a web browser). An RS-232 Windows GUI interface is provided for matrix routing.

The SB-5669k is professional 16x16 matrix routing switch. Supporting sixteen (16) HDMI™ Inputs. Output supported (16) HDMI™ ports. The SB-5669k is based on the HDMI™ standard 4K2K and supports full resolution HDMI™ Video with embedded EDID, With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed to any (16) Inputs to (16) outputs. The Switcher is certified as being fully CEC and HDCP 1.3 compliant, full HD 4K2K HDMI™ V1.4a 3D formats, data rates up to 6.75 Gbps. Supports UXGA / WUXGA / DVI 1920x1200 resolution to any HD displays. The SB-5669K has 1x HDMI™ connector for Input, effectively making this an 16 in x16 out switcher. The EDID management can be selected between seven (7) different modes. Control is provided via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

The SB-5688LCM is high-performance 8x8 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 2.25 Gbps, enabling 1080p HDMI™ formats and UXGA / WUXGA / DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any 8 outputs simultaneously. The Switcher is certified as being fully HDMI™ and HDCP compliant, with CE,FCC, REACH certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors,projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via Front panel push buttons, IR remote RS-232 or TCP/IP (not a web browser). An RS-232 Windows GUI interface is provided for matrix routing.

The SB-5688K is professional 8x4 matrix routing switch. Supporting eight (8) HDMI™ Inputs. Output supported (8) HDMI™ port. The SB-5688K is based on the HDMI™ standard 4K2K and supports full resolution HDMI™ Video with embedded EDID, With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed to any (8) Inputs to (8) outputs. The Switcher is certified as being fully CEC and HDCP 1.3 compliant, full HD 4K2K HDMI™ V1.4a 3D formats, data rates up to 6.75 Gbps. Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD displays. The EDID management can be selected between seven (7) different modes. Control is provided via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

The SB-5688AK is professional 8x8 matrix routing switch. Supporting eight (8) HDMI™ Inputs and (8) Auxiliary Audio Inputs. Output supported (8) HDMI™ and (8) S/PDIF audio. The SB-5688AK is based on the HDMI™ standard and supports full resolution HDMI™ Video with embedded EDID, With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed to any (8) Inputs to (8) outputs. The Switcher is certified as being fully CEC , ARC and HDCP 1.3 compliant, full HD 4K2K HDMI™ V1.4a 3D formats, data rates up to 6.75 Gbps. Supports UXGA/ WUXGA/DVI 1920x1200 resolution to any HD displays. The SB-5688AK has 1x HDMI™ and Auxiliary Audio (analog stereo audio) connector for Input, effectively making this an 8 in x8 out switcher. The EDID management can be selected between seven (7) different modes. Control is provided via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

The SB-5645LCM is high-performance 4x4 matrix routing switcher for HDMI™ signals. This switcher supports data rates up to 2.25 Gbps, enabling 1080p, HDMI™ formats and UXGA/WUXGA/DVI resolution to any HD displays. High Definition Digital signals can be selected and distributed to any 4 outputs simultaneously. The Switcher is certified as being fully HDMI™ and HDCP compliant, with CE,FCC certification. Support high resolution HDMI™ sources routed to HDMI™ displays, monitors, projector or audio receivers. The EDID can be selected between seven (7) different modes and learning mode. Control is provided via Front panel push buttons, IR remote or via RS-232. An RS-232 Windows GUI interface is provided for matrix routing.

Matrix Switcher Shinybow SB-4144 4x4 VGA-AUDIO MATRIX SWITCHER Input : 4x VGA(RGBHV), 4x Stereo Audio (AR/AL) Output : 4x VGA(RGBHV), 4x Stereo Audio (AR/AL)

Matrix Switcher Shinybow SB-5645AK (4K) 4x4 HDMI Matrix Switch with Auxiliary Audio Input : 4x HDMI, 4x Auxiliary Audio Output : 4x HDMI, 4x S/PDIF or ARC